Agilent Technologies N6700 Scpi Command Summary, Subsystem Commands, Scpi Command Description

Quick Reference 1

SCPI Command Summary

Subsystem Commands

		Some [optional] commands have been included for clarity. All settings commands
	NOTE
		have a corresponding query. Not all commands apply to all models.
SCPI Command			Description
ABORt
:ACQuire (@chanlist)			Resets the measurement trigger system to the Idle state
:TRANsient (@chanlist)			Resets the transient trigger system to the Idle state
CALibrate
:CURRent
[:LEVel] <NRf>, (@channel)			Calibrates the output current programming
:MEASure <NRf>, (@channel)			Calibrates the current measurement
:PEAK (@channel)			Calibrates the peak current limit (Agilent N6751A/52A/61A/62A)
:DATA <NRf>			Enters the calibration value
:DATE <SPD>, (@channel)			Sets the calibration date
:DPRog (@channel)			Calibrates the current downprogrammer
:LEVel P1 P2 P3			Advances to the next calibration step
:PASSword <NRf>			Sets the numeric calibration password
:SAVE			Saves the new cal constants in non-volatile memory
:STATE <Bool> [,<NRf>]			Enables/disables calibration mode
:VOLTage
[:LEVel] <NRf>, (@channel)			Calibrates the output voltage programming
:CMRR (@channel)			Calibrates common mode rejection ratio (N6751A/52A/61A/62A)
:MEASure <NRf>, (@channel)			Calibrates the voltage measurement
DISPlay[:WINDow]:VIEW METER1 METER4			Selects 1-channel or 4-channel meter view
FETCh
[:SCALar]
:CURRent [:DC]? (@chanlist)			Returns the average output current
:VOLTage [:DC]? (@chanlist)			Returns the average output voltage
:ARRay			(Array commands only on Agilent N6761A/62A and Option 054)
:CURRent [:DC]? (@chanlist)			Returns the instantaneous output current
:VOLTage [:DC]? (@chanlist)			Returns the instantaneous output voltage
INITiate
[:IMMediate]			(Acquire command only on Agilent N6761A/62A and Option 054)
:ACQuire (@chanlist)			Enables the measurement system to receive triggers
:TRANsient (@chanlist)			Enables the output transient system to receive triggers
:CONTinuous
:TRANsient <Bool>, (@chanlist)			Enables/disables continuous transient triggers
MEASure
[:SCALar]
:CURRent [:DC]? (@chanlist)			Takes a measurement; returns the average output current
:VOLTage [:DC]? (@chanlist)			Takes a measurement; returns the average output voltage
:ARRay			(Array commands only on Agilent N6761A/62A and Option 054)
:CURRent [:DC]? (@chanlist)			Takes a measurement; returns the instantaneous output current
:VOLTage [:DC]? (@chanlist)			Takes a measurement; returns the instantaneous output voltage

Series N6700 User’s Guide 15