Agilent Technologies manual Agilent N6700B, N6701A, N6702A MPS Mainframes

Appendix A Specifications

Agilent N6700B, N6701A, N6702A MPS Mainframes

Supplemental Characteristics

	N6700B, N6701A, N6702A
Command Processing Time:
	≤ 1 ms from receipt of command to start of output change
Protection Response Characteristics:
INH input	5 ∝s from receipt of inhibit to start of shutdown
Fault on coupled outputs	< 10 ∝s from receipt of fault to start of shutdown

Digital Control Characteristics:

Maximum voltage ratings

Pins 1 and 2 as FLT output

Pins 1 - 7 as digital/trigger outputs (pin 8 = common)

Pins 1 - 7 as digital/trigger inputs and pin 3 as INH input (pin 8 = common)

+16.5 VDC/− 5 VDC between pins

(pin 8 is internally connected to chassis ground).

Maximum low-level output voltage = 0.5 V @ 4 mA Maximum low-level sink current = 4 mA

Typical high-level leakage current = 1 mA @ 16.5 VDC

Maximum low-level output voltage = 0.5 V @ 4 mA; 1 V @ 50 mA; 1.75 V @ 100 mA

Maximum low-level sink current = 100 mA

Typical high-level leakage current = 0.8 mA @ 16.5 VDC

Maximum low-level input voltage = 0.8 V Minimum high-level input voltage = 2 V

Typical low-level current = 2 mA @ 0 V (internal 2.2k pull-up) Typical high-level leakage current = 0.12 mA @ 16.5 VDC

Interface Capabilities:

GPIB	SCPI - 1993, IEEE 488.2 compliant interface
LXI Compliance	Class C (only applies to units with LXI label on front panel)
USB 2.0	Requires Agilent IO Library version M.01.01 or 14.0 and up
10/100 LAN	Requires Agilent IO Library version L.01.01 or 14.0 and up
Built-in Web server	Requires Internet Explorer 5+ or Netscape 6.2+

Regulatory Compliance:

EMC	Complies with EMC directive for Class A test and
	measurement products.
	Complies with Australian standard and carries C-Tick mark.
	This ISM device complies with Canadian ICES-001.
	Cet appareil ISM est conforme à la norme NMB-001 du
	Canada.
	Electrostatic discharges greater than 1 kV near the I/O
	connectors may cause the unit to reset and require
	operator intervention.
Safety	Complies with European Low Voltage Directive and carries
	the CE-marking.
	Complies with US and Canadian safety standards for test
	and measurement products.

86 Series N6700 User’s Guide