Agilent Technologies N6700 manual Common Commands, RST Settings, Command Description

1 Quick Reference

SCPI Command	Description
TRIGger
:ACQuire	(Acquire commands only on Agilent N6761A/62A and Option 054)
[:IMMediate] (@chanlist)	Triggers the measurement immediately
:SOURce BUS PIN<n> TRAN<n>, (@chanlist)	Sets the measurement trigger source
:TRANsient
[:IMMediate] (@chanlist)	Triggers the output immediately
:SOURce BUS PIN<n> TRAN<n>, (@chanlist)	Sets the output trigger source

Common Commands

Command Description

Command Description

*CLS	Clear status
*ESE <NRf>	Standard event status enable
*ESR?	Return event status register
*IDN?	Return instrument identification
*OPC	Enable "operation complete" bit in ESR
*OPT?	Return option number
*RCL <NRf>	Recalls a saved instrument state
*RDT?	Return output channel descriptions

*RST	Reset
*SAV <NRf>	Saves an instrument state
*SRE <NRf>	Set service request enable register
*STB?	Return status byte
*TRG	Trigger
*TST?	Performs self-test, then returns result
*WAI	Pauses additional command processing
	until all device commands are done

*RST Settings

These settings are set by the *RST (Reset) command

CAL:STAT	OFF
[SOUR:]CURR	0.08 or MIN
[SOUR:]CURR:MODE	FIX
[SOUR:]CURR:PROT:STAT	OFF
[SOUR:]CURR:RANG	MAX
[SOUR:]CURR:TRIG	MIN
[SOUR:]DIG:OUTP:DATA	0
DISP:VIEW	METER1
INIT:CONT:TRAN	OFF
[SOUR:]LIST:COUN	1
[SOUR:]LIST:CURR	MIN
[SOUR:]LIST:DWEL	0.001
[SOUR:]LIST:STEP	AUTO
[SOUR:]LIST:TERM:LAST	OFF
[SOUR:]LIST:TOUT:BOST	OFF
[SOUR:]LIST:TOUT:EOST	OFF
[SOUR:]LIST:VOLT	MIN
OUTP	OFF
OUTP:DEL:FALL	0
OUTP:DEL:RISE	0

OUTP:PMODVOLT

OUTP:PROT:COUPOFF

OUTP:PROT:DEL0.02

OUTP:REL:POLNORM

[SOUR:]POW:LIMMAX

SENS:CURR:RANGMAX

SENS:FUNC“VOLT”

SENS:SWE:POIN1024

SENS:SWE:OFFS:POIN0

SENS:SWE:TINT20.48E−6

SENS:VOLT:RANGMAX

SENS:WINDRECT

[SOUR:]STEP:TOUTFALSE

TRIG:ACQ:SOURBUS

TRIG:TRAN:SOURBUS

[SOUR:]VOLTMIN

[SOUR:]VOLT:MODEFIX

[SOUR:]VOLT:PROTMAX

[SOUR:]VOLT:RANGMAX

[SOUR:]VOLT:SLEW9.9E+37

[SOUR:]VOLT:TRIGMIN

18 Series N6700 User’s Guide