Agilent Technologies N6700 manual Module Power Allocation, To set a power limit on output

Power Allocation Appendix C

Module Power Allocation

	The following commands program the module power limit function:
	Front Panel:	SCPI Command:
	Select Output\Power.	To set a power limit on output 1:
	Enter a power limit for each output.	POW:LIM 100,(@1)
	To query the power limits that are set, send:
	Front Panel:	SCPI Command:
	Select Output\Power.	POW:LIM? (@1:4)
	The power allocation for all output
	channels is displayed in the dialog boxes.
	To return all output channels to their default settings, you can either
	cycle AC power or send the following commands:
	Front Panel:	SCPI Command:
	Select States\Reset	*RST
		or
		POW:LIM MAX,(@1:4)
	When an output channel is set to MAX, it returns to its maximum rated value,
NOTE
	and the power limit function will not activate.

Series N6700 User’s Guide 97