Aiwa CSD-MD50 manual About The Index Mark, Manual Mark Function, When recording from a CD, English

ABOUT THE INDEX MARK

The unit registers index marks while recording on an MD. Index marks allow you to easily locate the desired tracks.

When recording from a CD

The index mark information recorded on the CD is copied as it is.

CD 2nd track I 3rd track I 4th track I

Recording 2nd track 3rd track 4th track (MD).,

AA AA

A :Index mark

When recording from a tape

An index mark is registered automatically when a sound signal is input after a blank section lasting more than 3 seconds.

Recording	2nd	track	3rd track	4th	track
(MD)
			A	A
	A				A
	A	:Index	mark

When recording from radio

The index mark information is registered every 5 minutes.

m

There may be a case where index marks are not registered accurately.

MANUAL MARK FUNCTION

When recording using the ● MD REC button (page 21), you can record index mark information anytime you want by pressing the ENTER button.

To record on a previously recorded MD

If there is an unrecorded section left on the MD, the new recording automatically starts from where the previous recording finished. If you want to start recording from the beginning of a previously

recorded MD, erase the previous recording completely. (See page 25.)

To check the recordable time of the MD

Press the FUNCTION buttonon the remote controlto select other than MD, and load an MD. Then mess the DISPLAY button on

the remote control (or the DISP button on the main unit). The recordable time on the MD is displayed for 5 seconds.

\

To prevent accidental erasure of recorded material

Slide the record-protect tab as shown below.

Slide the tab so that it is completely locked.

To protect recorded contents

If a recording is attempted when the tab is set to the ~rotected position, “Protected” appears on the display. Move the protect- tab to the original position.

18 ENGLISH