This process copies a Master Disc to several blank discs simultaneously. Due to the nature of simultaneous disc duplication, a good quality Master Disc and lower recording speeds maybe necessary to ensure high success and quality duplications rates.
1.Turn on the duplicator. After the duplicator has booted up, you will see the following display:
Aleratec | 1.00 |
1. COPY |
|
COPY USB | PRINT SOURCE |
ESC ENT
2.Make sure the Source Drive is set to the BD/DVD/CD source drive.
It is very important to make sure that your current Source Drive is the BD/DVD/ CD source drive in order to avoid unnecessary error messages. To check the Source Drive, do the following:
a.Use UP or DOWN arrow buttons to navigate to the following screen, or press the “SOURCE” Fast Key:
Aleratec | 1.00 |
9. Select Source |
|
COPY USB PRINT | SOURCE |
ESC ENT
b.Press ENT to enter Select Source menu and you will see the following:
Drive 1 Port 0.0
XXXXXX
COPY USB PRINT SOURCE
ESC ENT
Make sure it is located at “Drive 1 Port 0.0”. If not, press the UP or DOWN navigation button to search for it. There will be drive model information where XXXXXX is shown above.
c.Press ENT to submit your selection.
3.Go back to the “COPY” menu.
a.Use UP or DOWN arrow button to navigate to the following screen:
Aleratec | 1.00 |
1. COPY |
|
COPY USB | PRINT SOURCE |
ESC ENT
www.aleratec.com17