e.You now have the choice to load your Master Disc into a new (empty) partition or overwrite one of the existing partitions (if any exist) by inputting/modifying the name you desire; or you can simply choose “Auto Generate” to have the system automatically generate a partition name for you. Afterwards, simply press the UP or DOWN arrow button to find your desired selection and press ENT to submit your selection. You will see the following (unless you have chosen “Auto Generate”, then please skip to Step “h”):
EDIT PARTITION NAME
[ | ] OK? |
COPY | USB PRINT SOURCE |
ESC ENT
f.Name the partition you are about to load into the Hard Drive. To enter the name, use the UP or DOWN button to select the character and use ESC or ENT button to move the cursor position and once you’ve finished move the cursor to OK and press ENT. For example, if I want to name the partition of your Master Disc as “FUN”, do the following:
EDIT PARTITION NAME
[x | ] OK? |
COPY | USB PRINT SOURCE |
ESC ENT
Make sure the cursor is located at the first position:
i.Press DOWN button consecutively until “F” is displayed.
ii.Press ENT button once to move the cursor to the next position.
iii.Press “DOWN” button consecutively until “U” is displayed.
iv.Press ENT button once to move the cursor to the next position.
v.Press “DOWN” button consecutively until “N” is displayed.
vi.Press ENT button once to move the cursor to the next position.
vii.With the partition name “FUN” displayed press ENT consecutively until the cursor is moved to OK.
viii.Press ENT once to submit your name selection. g. You will see the following confirmation screen:
Load Partition?
[FUN | ] OK? |
COPY | USB PRINT SOURCE |
ESC ENT
26www.aleratec.com