Aleratec 260203 Press, Preparing, Preparing, Processing, Then, press, Please Wait, Please allow, Waiting for Blanks, 34www.aleratec.com, 7 Disc Detected, Go

Stand-Alone Tower Publisher SLS: Tutorials

How to Make Copies from the Hard Drive - continued

vii.Press DOWN button consecutively until “1” is displayed.

viii.Now, we have “0021” displayed and then, press ENT once and the cursor is now moved to OK.

ix.Then, press ENT once to submit your counter value.

Now you will see following screen:

Preparing...	
Waiting for Blanks	ESC ENT
COPY USB PRINT SOURCE	

Note: If the ABOVE screen is displayed for more than 2 minutes, please check your Blank Discs for quality.

d.Please allow 5-10 seconds for the duplicator to detect your Hard Drive partition and Blank Discs as well. After your Hard Drive partition and Blank Discs have been recognized, then you will see the following screen:

Preparing...

7 Disc Detected, Go?

COPY USB PRINT SOURCE



ESC ENT



The “7” indicates there are 7 discs that were recognized by the recording tray. Actual quantity may be different depending on your machine.

Note: By default, the “Auto Start” setting is set to “Auto”. For example, if your duplicator has detected 3 blank discs and didn’t detect any additional blank discs for 30 seconds, then the duplication will be started automatically.

Note: Once the number of blank discs you inserted matches the number of discs detected on the screen. Then press ENT (if you are not using Auto Start or wish to speed up the process) to confirm and the following Processing screen will appear.

Processing...

Please Wait

COPY USB PRINT SOURCE



ESC ENT



34www.aleratec.com