Menu Overview

6.Test + Copy

This menu will guide you to perform a simulation of the copying process. If everything passes the simulation, the copying process will be performed. If there’s an error encountered during the simulation, an error message will be displayed and the copying process will not be initiated.

7.Copy + Compare

This menu will guide you to make copies and automatically perform a bit-by- bit comparison between the Master Reading Source and all the copied discs inside the Writer Tray.

8.Select Burn Speed

This menu will guide you to adjust the duplication speed in various duplication modes.

9.Select Source

This menu will guide you to set the Master Reading Source.

10.Erase

This menu will guide you to erase your rewriteable discs in the Writer Tray. There are two options to erase your rewriteable discs:

a.Full Erase: It will erase the entire disc which will make it impossible to be recovered.

b.Quick Erase: It will erase the index of the rewriteable disc, not the data section.

11.Hard Drive Setup

This menu will guide you to perform various Hard Drive related operations such as Loading, Renaming, or Deleting your images.

12.Print Setup

This menu has the utilities for setting up a print job and managing labels.

▪▪Load Label

▪▪Rename Label

▪▪Delete Label

▪▪Print Surface Info

▪▪Label Info

▪▪Select Loading Drive

60www.aleratec.com