Stand-Alone Tower Publisher SLS: Tutorials

To continue making additional copies, remove the successfully completed copies from the ejected trays and replace with blank discs. To terminate your project and return to the main menu, press ESC.

If you’ve specified a counter value you will see the following display when your project is completed:

21 Disc Copied

Press OK to Finish

ESC ENT

COPY USB PRINT SOURCE

If you see above message, you can press ENT to go back to main menu.

Note: If you enabled the counter and the number of blank discs you have inserted is greater than the number you requested, you will receive a message indicating you have inserted more discs than what you need. You can continue to copy or you can eject the extras discs.

Note: Failed discs will not be ejected automatically. You will need to manually eject these.

Load Source Files onto the Hard Drive

The number of partitions the hard drive can hold is determined by the capacity of your hard drive and the size of the partitions you created.

For example, if you have an 80GB Hard Drive with a system capacity of 74GB.* You can load 74 CDs or 19 DVDs (given a 4GB average capacity).

*There are many factors that could contribute to the capacity difference between the advertised capacity and the actual capacity:

▪▪Hard Drive Manufactures use conversion rate of 1GB = 1 Billion Bytes or 1000^3 Bytes. However, most Operating Systems, including our Duplication System use standard conversion rate of 1GB = 1.074 Billion Bytes or 1024^3 Bytes. Therefore, for an advertised 80GB Hard Drive (80 Billion Bytes), the Duplication System capacity is actually 74.5 Billion Bytes (74.5GB).

▪▪In addition, we round off all fractions of a GB to the lower whole number. That means for a hard drive that has a 74.5GB system capacity, we only recognize and utilize 74GB.

22www.aleratec.com