To access the “Manage Accounts” feature, perform the following steps:
1.Turn on the duplicator. After the bootup is complete, you will see the following display:
Aleratec | 1.00 |
1. COPY |
|
COPY USB | PRINT SOURCE |
ESC ENT
2.Press the UP or DOWN button consecutively until you see following:
Aleratec | 1.00 |
16. Manage Accounts | |
COPY USB | PRINT SOURCE |
ESC ENT
3.Press ENT. You will be asked for the Administrator’s Password.
Enter Admin’s PWD [XXXX] OK
COPY USB PRINT SOURCE
ESC ENT
By default, the Administrator’s Password is “0000”. To enter that, press UP or DOWN button to select the first digit of your password and press the ENT button to submit the current digit. You will be guided to select the next digit. Repeat above steps until you’ve selected all digits of your password. After you have entered the password, press the ENT button to submit your password.
4.Once your password is validated, you will be guided to “Manage Accounts”. You will see the following display:
Manage Accounts
1. View User
COPY USB PRINT SOURCE
There are five menus in “Manage Accounts”:
1View User
2Create User
3Edit User Info
4Delete User
5Password on Bootup
ESC ENT
www.aleratec.com51