Aleratec 260203 OFF, OFF, 15.Utilities

Menu Overview

14.11 DVD+R High Compatibility Mode

This feature allows you to enable/disable the DVD+R High Compatibility Mode feature by turning this feature ON or OFF. The purpose of this feature is to increase the compatibility of DVD+R media with a broader range of DVD Video players. This process will increase the amount of time required to duplicate your disc(s).

14.12 ISRC

This option allows you to enable/disable copying ISRC code of the Audio CD. ISRC is the serial# of the audio tracks that uniquely identifies the song in that audio track. This ISRC code is commonly found in commercial Audio CD and rarely seen on the home made Audio CDs. By enabling this feature, the duplication performance will be lowered.

14.13 Disable Drives

This feature allows you to disable certain drives/trays when those drives/ trays are producing high failure rates or not functioning properly.

14.14 USB Connection

This feature allows you to turn on/off the USB port on the back of your duplicator. This option will allow a Writer on the duplicator to be controlled by a PC. This feature will only be visible if the supported USB Connection were installed.

*Please note that system will be restarted when this setting is changed.

14.15 Overburn (CDs Only)

This feature allows you to burn a few MB more than the standard capacity of the target CD (e.g. 75 minutes of recording time vs. 74 minutes). The default setting is OFF.

15.Utilities

15.1Disc Info

This feature will identify your blank recordable Media’s format, capacity, manufacture ID as well as the Media’s certified writing speed. This function (Disc Info) can be found in the “Utility” menu.

Note: This feature only applies to media in the recording trays.

www.aleratec.com63

Contents

Page Check out Aleratec Online •aleratec.com •facebook.com/Aleratec •twitter.com/Aleratec •youtube.com/Aleratec Page WARNING CAUTION 1:15 Blu-ray/DVD/CDTower Publisher SLS: Removable Hard Disk Drive Introduction to Manage Accounts Recommended Media Page Product Features *Note: There is currently no LightScribe Blu-raymedia available Key Items – 1:15 Blu-ray/DVD/CDTower Publisher SLS Removable Control Panel Hard Disk Drive BD/DVD/CD 1:15 Blu-ray/DVD/CDTower Publisher SLS: LCD Front Panel COPY USB PRINT SOURCE To remove the HDD: To replace the HDD: Choose a Good Location: Input Voltage Selection: Operation: Duplicator Limitations: External Connection Warning: Maintenance: Proper Shutdown: Transportation Unpacking the Unit •1:15 Blu-ray/DVD/CDTower Publisher SLS •2 Power Cords •1 USB 2.0 Cable •1 Quick Start Guide LightScribe Software Installation Minimum System Requirements: PC running Windows 2000, XP, Vista or a.LightScribe System Software b.LightScribe Template Labeler Page Page Using the LightScribe Labeling Software Note: Depending on the template chosen, you may enter multiple lines of text Using the LightScribe Labeling Software - continued LABEL ENT Menu 3: Copy+Print Menu 12.1: Load Label Menu 12.2: Rename Label Menu 12.3: Delete Label Menu 12.4: Print Surface ID Control Functions Control Functions 16www.aleratec.com Making Disc-to-DiscCopies Page Example: Page Counter Specified Copying... 4012MB 0/21 12% 481MB 4012MB 12% Load Source Files onto the Hard Drive Load Source Files onto the Hard Drive - continued Load Master Disc onto the Hard Drive Load Master Disc onto the Hard Drive - continued Page Page Rename Existing Hard Drive Partition Name Rename Existing Hard Drive Partition Name - continued Delete Existing Hard Drive Partition Permanently Delete Existing Hard Drive Partition Permanently - continued How to Make Copies from the Hard Drive 2.Go back to “COPY” Menu 1.0 COPY 3.Start the Copy Process [FUN ] DVD 4000MB Page How to Make Copies from the Hard Drive - continued Now, we have “0021” displayed and then, press Now you will see following screen: Please allow 7 Disc Detected, Go Copying... H4012MB 0 12% 481MB www.aleratec.com35 Page Select Burn Speed Select Burn Speed - continued Select the Source drive Select the Source drive - continued Change the SETUP Settings 14. Setup 2.Press ENT to enter “Setup” menu. You will see the following display: Setup 1. Language Audio CD Editing 4.Once you made your selection, you will see the following display: Waiting for Blank Total: 0 Trk 0m : 0s Track 1: Audio CD Editing - continued Auto Editing 4m : 37s Warning OVER BLANK DISC CAPA Press OK to Continue If you choose to finalize it, press the Total 6 Trk 26m : 17s Finish Editing Press the ENT button to continue. You will see following confirmation display: Processing to Disc Example of Mixing Audio Tracks to the Hard Drive Page Page Page Introduction to Manage Accounts Manage Accounts: Overview View User Create User Edit User Info Delete User Password on Bootup On the Fly Load and Copy Prompt Page Introduction to Duplication Mode - continued Using AUTOCOPY Using AUTOCOPY - continued Note: It is normal to see the progress indicator stay at 0-10% Menu Overview 1.Copy 2.Print 3.Copy + Print 4.Test 6.Test + Copy 7.Copy + Compare 8.Select Burn Speed 9.Select Source 10.Erase 13.Mix Audio Tracks 14.Setup 14.Setup - continued 14.4CD Writing Mode 14.5Max Audio, VCD & CDG Speed 14.6Buzzer 14.7Startup Menu 15.Utilities 15.Utilities - continued 15.2Prescan 15.3System Info 15.4Device Info 15.5Load Default 16.Manage Accounts 17.Autocopy 18. Shutdown 1.No display on LCD or the unit does not operate when the power is on 2.Cannot read source disc Select the Source drive” 3.Buttons do not function 4.Copy completed but the copies are not readable / executable 7.Cannot boot-upor fails to upgrade firmware 8.Can I load data directly from my computer to my duplicator’s Hard Drive 9.How do I reset my duplicator back to default Error Codes Error Code Error Message Recommendation 68www.aleratec.com DVD-RAMis not Not enough HDD There is not enough hard drive space to create a space new partition. Please delete some existing Non-LightScribe Blu-rayMedia: Technical Support Addresses and Phone Numbers XX By e-mail: support@aleratec.com www.aleratec.com FAX at: Aleratec, Inc., Limited Warranty Please Note: To Obtain Warranty Service: Aleratec, Inc Technical Support Fax Back Form Model No.:_ _________________ Serial No.: Date Purchased: Place of Purchase: