Stand-Alone Tower Publisher SLS: Tutorials

4.Start the Copy Process.

a.Insert your Master Disc and blank discs into their corresponding tray(s) and press the ENT button. You will see the following display:

Duplication Mode:

Load and Copy

ESC ENT

COPY USB PRINT SOURCE

b.“Duplication Mode” offers three choices:

▪▪Load and Copy

▪▪On the Fly

▪▪Prompt

Press UP or DOWN arrow button to display your desired mode. Press the ENT button to confirm.

c.“No Counter” can be used when you prefer to copy continuously with no interruption. (It will still count the number of copies, but it will not notify you when to stop.) To select the “No Counter”, press ENT when you see the above screen. Then skip to step “d” on page 19 of this User Guide.

Counter:

No Counter

ESC ENT

COPY USB PRINT SOURCE

“Specify Counter” lets you to select the number of copies you want to make. The duplicator will count the number of copies you’ve made and prompt you when the desired number of copies has been completed.

Counter:

Specify Counter

COPY USB PRINT SOURCE

ESC ENT

Press ENT button to select. Enter between 1 to 9999 copies.

Specify Counter: [0 ] OK?

COPY USB PRINT SOURCE

ESC ENT

Enter a 4-digit number to specify the number of copies you want to make. To specify a number less than 4 digits, fill the leading spaces with “0”s (any leading “0” will be skipped). For example, “0234” will give you two hundred and thirty four copies, and “0010” will give you ten copies.

18www.aleratec.com