Menu Overview

15.Utilities - continued15.2Prescan

This feature allows you to scan and detect any bad sectors existing in the Master Disc. It is recommended that you perform a Prescan before starting the duplication task for all Master Discs. Approximately 50% of failures reported by the duplicator are caused by errors in the Master Disc which the Reader couldn’t overcome. When this kind of failure occurs, it tends to waste all of your blank recordable medias.

15.3System Info

By entering this menu, you will be able to see the many specification of your duplicator such as the firmware version, CPU type, RAM capacity. You can check the specifications by pressing UP or DOWN button.

15.4Device Info

By entering this menu, you will be able to see the information for devices built inside your duplicator. That information includes but limited to manufacture, model number, etc.

15.5Load Default

This function will reset all of the options back to manufacture’s default. You can perform this function if your duplicator is acting abnormal. You need to perform “Shutdown” and restart the system in order for this to take effect.

15.6Update Firmware

This function will update the software of your duplicator. To update, you need to insert manufacture Certified Update CD into the Reader and select this function by pressing ENT button. We strongly suggest you to not upgrade your duplicator’s firmware unless your duplicator is getting unstable.

15.7Save

This function will save all the settings you’ve modified since last time the system is booted.

64www.aleratec.com