Stand-Alone Tower Publisher SLS: Tutorials

Note: If either one of the PREVIOUS 2 screens are displayed for more than 2 minutes, please check your Master Disc or blank discs for quality.

d.Allow 5-10 seconds for the duplicator to detect both your Master Disc and blank discs. After your Master Disc and blank discs have been recognized, you will see the following display:

Preparing...

X Disc Detected, Go?

COPY USB PRINT SOURCE

ESC ENT

Note: “X” indicates the number of discs recognized by the Writer Tray. For this example, number of discs could be up to 15.

Note: By default, the “Auto Start” setting is set to “Auto”. For example, if your duplicator has detected 3 blank discs and didn’t detect any additional blank discs within 30 seconds, the duplication will start automatically.

When the number of blank discs inserted matches the number of discs detected press ENT to confirm. You will see the following display:

Processing...

Please Wait

COPY USB PRINT SOURCE

ESC ENT

Note: Give the duplicator 10-15 seconds to recognize all the blank discs. If the number of blank discs you inserted doesn’t match the number of discs detected...

20www.aleratec.com