Stand-Alone Tower Publisher SLS: Tutorials

Change the SETUP Settings

Most of the internal settings and information are stored inside the “Setup” menu. To explore and modify these settings is simple. In the following example you will be modifying the “Auto Start” setting.

Note: The default “Setup” is set for optimal performance. It is unnecessary to change this setting if you are satisfied with your duplicator performance.

1.Use the UP or DOWN arrow button to navigate to the following screen.

Aleratec

1.00

14. Setup

 

COPY USB

PRINT SOURCE

ESC ENT

2.Press ENT to enter “Setup” menu. You will see the following display:
Setup

1. Language

ESC ENT

COPY USB PRINT SOURCE

3. Use the UP or DOWN arrow button to navigate to the following screen.

Setup

2. Auto Start

COPY USB PRINT SOURCE

ESC ENT

4.Press ENT to enter “Auto Start Setting” menu. You will see the following display:

Auto Start

Auto

ESC ENT

COPY USB PRINT SOURCE

5.Use the UP or DOWN arrow button to modify the setting to “Full”. Press ENT to submit your selection. You will see the following display:

Setup

2. Auto Start

COPY USB PRINT SOURCE

ESC ENT

6.To modify more settings, go back to step 3. Otherwise, press ESC button to go back to main menu.

Aleratec

1.00

14. Setup

 

COPY USB

PRINT SOURCE

ESC ENT

www.aleratec.com41