When you load your Master Disc to a hard drive partition, you are asked to give it a name. You can rename it at anytime afterwards (including the Reserved Partition). To rename your existing hard drive partition name, do the following:
1.Use the UP or DOWN arrow button to navigate to the following screen.
Aleratec | 1.00 |
11. Hard Drive Setup |
|
COPY USB PRINT | SOURCE |
ESC ENT
2.Press ENT to enter “Hard Drive Setup” menu. You will see the following display:
Hard Drive Setup 1. Select Partition
COPY USB PRINT SOURCE
ESC ENT
3.Use the UP or DOWN arrow button to navigate to the following screen.
Hard Drive Setup
3. Rename Partition
COPY USB PRINT SOURCE
ESC ENT
4.Press ENT to enter the “Rename Partition” menu. You will see the following display:
Choose Partition: |
| |
[FUN | ] DVD | 4000MB |
COPY | USB PRINT | SOURCE |
ESC ENT
5.Use the UP or DOWN arrow button to find the desired partition. Press ENT to submit your selection. You will see the following display:
Rename Partition:
[FUN | ] DVD, OK? |
COPY | USB PRINT SOURCE |
ESC ENT
6.Press ENT once again to confirm. You will see the following display:
Rename Partition:
[FUN | ] OK |
COPY | USB PRINT SOURCE |
ESC ENT
28www.aleratec.com