This process will allow you to adjust the duplication speed subject to your various needs.
By default, the duplication speed will be set to the optimal speed. However, under some circumstances, you might want to lower the duplication speed. Those circumstances are as follows:
•Poor Blank Media Quality – When your media quality is not good, lowering down the duplication speed is necessary to make good copies.
•Poor Master Disc Quality – If your Master Disc condition is not good, lowering down the duplication speed will reduce the failure rates greatly.
•Duplication Quality – Overall, the lower the speed, the higher the quality of your duplicates. If you have time, it is a good choice to lower down the speed to produce the best quality duplicates.
Turn on your duplicator. After it has finished booting up, you will see the following display.
Aleratec | 1.00 |
1. COPY |
|
COPY USB | PRINT SOURCE |
ESC ENT
1.Navigate to the “Speed Selection” menu.
Press UP or DOWN arrow button to navigate to the following screen.
Aleratec | 1.00 |
8. Select Burn Speed | |
COPY USB | PRINT SOURCE |
ESC ENT
2.Enter the “Speed Selection” menu.
Press ENT button to enter into “Speed Selection” menu. You will see the following display:
Select Burn Speed:
DVD to DVD
COPY USB PRINT SOURCE
ESC ENT
www.aleratec.com37