Allied Telesis AT-WA1004G manual To be set OFF

Advanced Features

PC (Server)	Select the PC for this Server. The PC must be running
	the appropriate Server software.
Protocol	Select the protocol (TCP or UDP) used by the Server.
Internal Port	Enter the port number which the Server software is
No.	configured to use.
External Port	The port number used by Internet users when
No.	connecting to the Server. This is normally the same as
	the Internal Port Number. If it is different, this device will
	perform a “mapping” or “translation” function, allowing
	the server to use one port address, while clients use a
	different port address.
Buttons
Defaults	This will delete any Servers you have defined, and set
	the pre-defined Servers to use their default port
	numbers.
Disable All	This will cause the “Enable” setting of all Virtual Servers
	to be set OFF.
Update	Update the current Virtual Server entry, using the data
	shown in the “Properties” area on screen.
Add	Add a new entry to the Virtual Server list, using the data
	shown in the “Properties” area on screen. The entry
	selected in the list is ignored, and has no effect.
Delete	Delete the current Virtual Server entry. Note that the
	pre-defined Servers can not be deleted. Only Servers
	you have defined yourself can be deleted.
Clear Form	Clear all data from the “Properties” area, ready for input
	of a new Virtual Server entry.

Note

For each entry, the PC must be running the appropriate Server software.

100