Allied Telesis AT-WA1004G manual Access Control Log

Access Control Log

	AT-WA1004G User’s Guide
Finish Port	For TCP and UDP Services, enter the end of
	the range of port numbers used by the
	service. If the service uses a single port
	number, enter it in both the “Start” and
	“Finish” fields.
ICMP Type	For ICMP Services, enter the type number of
	the required service.
Buttons
Delete	Delete the selected service from the list.
Save	Add a new entry to the Service list, using the
	data shown in the “Add New Service” area
	on screen.
Cancel	Clear the “Add New Service” area, ready for
	entering data for a new Service.

To check the operation of the Access Control feature, an Access Control Log is provided. Click the View Log button on the Access Control screen to view this log.

This log shows attempted Internet accesses which have been blocked by the Access Control function.

Data shown in this log is as follows:

Date/Time	Date and Time of the attempted access.
Name	If known, the name of the PC whose access was
	blocked.
Source IP	The IP Address of the PC or device whose access
Address	request was blocked
MAC Address	The hardware or physical address of the PC or
	device whose access request was blocked
Destination	The destination URL or IP address

89