![](/images/new-backgrounds/1205704/205704121x1.webp)
Macintosh Clients
From your Macintosh, you can access the Internet via the Wireless
Router. The procedure is as follows.
1.Open the TCP/IP Control Panel.
2.Select Ethernet from the Connect via
3.Select Using DHCP Server from the Configure
4.Close the TCP/IP panel, saving your settings.
Note
If using manually assigned IP addresses instead of DHCP, the required changes are:
-Set the Router Address field to the Wireless Router's IP Address.
-Ensure your DNS settings are correct.
61