PC Configuration
Wireless Station Configuration
This section applies to all Wireless stations wishing to use the Wireless Router's Access Point, regardless of the operating system which is used on the client.
To use the Wireless Access Point in the Wireless Router, each Wireless
Station must have compatible settings, as follows:
Mode | The mode must be set to Infrastructure. |
|
|
|
|
SSID (ESSID) | This must match the value used on the |
| Wireless Router. The default value is default. |
| Note: The SSID is case sensitive. |
|
|
WEP | By default, WEP on the Wireless Router is |
| disabled. |
| ❏ If WEP remains disabled on the Wireless |
| Router, all stations must have WEP |
| disabled. |
| ❏ If WEP is enabled on the Wireless Router, |
| each station must use the same settings |
| as the Wireless Router. |
|
|
64
