Operation and Status
Connection Status - Telstra Big Pond
Data - Big Pond Screen
Connection
Physical Address | The hardware address of this device, as seen |
| by remote devices. (This is different to the |
| hardware address seen by devices on the |
| local LAN.) |
|
|
IP Address | The IP Address of this device, as seen by |
| Internet users. This address is allocated by |
| your ISP (Internet Service Provider). |
|
|
Connection Status | This indicates whether or not the connection |
| is currently established. |
| ❏ If the connection does not exist, the |
| “Connect” button can be used to |
| establish a connection. |
| ❏ If the connection currently exists, the |
| “Disconnect” button can be used to break |
| the connection. |
| ❏ Normally, it is not necessary to use the |
| Connect and Disconnect buttons unless |
| the setting “Connect automatically, as |
| required” is disabled. |
|
|
Connection Log |
|
|
|
Connection Log | ❏ The Connection Log shows status |
| messages relating to the existing |
| connection. |
| ❏ The Clear Log button will restart the Log, |
| while the Refresh button will update the |
| messages shown on screen. |
|
|
Buttons |
|
|
|
Connect | If not connected, establish a connection to |
| Telstra Big Pond. |
|
|
Disconnect | If connected to Telstra Big Pond, terminate |
| the connection. |
|
|
74
