Allied Telesis AT-WA1004G manual For more information, refer to Front Panel LEDs on

Models: AT-WA1004G

1 142
Download 142 pages 57.76 Kb
Page 26
Image 26

Installation

5.Connect the supplied power adapter to the Wireless Router and power up. Use only the power adapter provided. Using a different one may cause hardware damage

6.Verify that the Power LED is ON. The Status LED should flash, then turn OFF. If it stays ON, there is a hardware error. For each LAN (PC) connection, the Link/Act LED should be ON (provided the PC is also ON.) The WAN LED should be ON. The WLAN LED should be ON

For more information, refer to Front Panel LEDs on page 19.

26

Page 26
Image 26
Allied Telesis AT-WA1004G manual For more information, refer to Front Panel LEDs on