Allied Telesis AT-WA1004G

AT-WA1004G User’s Guide

Using the Wireless Router's DHCP Server

This is the default setting. The DHCP Server settings are on the LAN

screen. On this screen, you can:

❑Enable or Disable the Wireless Router's DHCP Server function.

❑Set the range of IP Addresses allocated to PCs by the DHCP Server

function.

Note

You can assign Fixed IP Addresses to some devices while using

DHCP, provided that the Fixed IP Addresses are NOT within the

range used by the DHCP Server.

Using another DHCP Server

You can only use one (1) DHCP Server per LAN segment. If you wish to

use another DHCP Server, rather than the Wireless Router's, the

following procedure is required.

1. Disable the DHCP Server feature in the Wireless Router. This setting

is on the LAN screen.

2. Configure the DHCP Server to provide the Wireless Router's IP

Address as the Default Gateway.

To Configure your PCs to use DHCP

This is the default setting for TCP/IP under Windows 95/98/ME. See PC

Configuration on page 47 for the procedure to check these settings.