Allied Telesis AT-WA1004G manual Connection Status L2TP, Data L2TP Screen

AT-WA1004G User’s Guide

Connection Status - L2TP

If using L2TP, a screen will be displayed when the “Connection Details” button is clicked.

Data - L2TP Screen

Connection

Physical Address	The hardware address of this device, as seen by
	remote devices on the Internet. (This is different to
	the hardware address seen by devices on the local
	LAN.)
IP Address	The IP Address of this device, as seen by Internet
	users. This address is allocated by your ISP
	(Internet Service Provider).
Connection	This indicates whether or not the connection is
Status	currently established.
	❏ If the connection does not exist, the “Connect”
	button can be used to establish a connection.
	❏ If the connection currently exists, the
	“Disconnect” button can be used to break the
	connection.
Connection Log
Connection Log	❏ The Connection Log shows status messages
	relating to the existing connection.
	❏ The “Clear Log” button will restart the Log,
	while the Refresh button will update the
	messages shown on screen.
Buttons
Connect	If not connected, establish a connection to your
	ISP.
Disconnect	If connected to your ISP, hang up the connection.
Clear Log	Delete all data currently in the Log. This will make
	it easier to read new messages.
Refresh	Update the data on screen.

73