Moving The SymmetraTM Frame and Modules
The frame (bolted to the pallet), should be positioned with a pallet jack or a fork lift. Leave enough space to unpack the frame, install the ramp, and for two people to roll it onto the floor. The SymmetraTM frame can be moved over a flat, smooth floor surface by rolling it on the frame casters. The individually boxed power and battery modules should be stacked close to the installation site.
Caution! 
νDo not install battery modules into the SymmetraTM frame until after electrical wiring connections have been made, and the system is ready to be powered.
νIf battery modules are to be stored for an extended time, store them in a dry, cool environment.
νBattery modules are heavy (70 lb). Two people are required to carry, move and install them.
Page 2 - Receiving and Unpacking | |
|
