American Power Conversion SYMSTRF3I PowerView Meaning Corrective Action Message, General

	PowerView	Meaning	Corrective Action
	Message
General	Fault, Internal Temp exceeded	The temperature of one or more	Replace the overheated modules. Refer
Fault	normal limits	battery modules is too hot.	to Appendix C for module replacement
			procedures.
	Input circuit breaker tripped	The input circuit breaker on the	Option #1: If this occurs in conjunction
	open	SymmetraTM has tripped.	with an overload condition, decrease the
		Input voltage is disconnected to the	load and reset the breaker.
		SymmetraTM.	Option #1: If no overload condition
			exists, reset breaker. If it trips again, call
			your contract service provider, or APC
			Technical Support. (See inside front
			cover.)
	System level fan failed	A cooling fan in the SymmetraTM	Call your contract service provider, or
		frame has failed.	APC Technical Support. (See inside front
			cover.)
	The Redundant Intelligence	The main intelligence module has	Replace the intelligence module. Refer to
	Module is in control	failed, and the RIM is functioning as	Appendix C for module replacement
		the primary intelligence module.	procedures.
	IIC inter-module	The communications between the	Call your contract service provider, or
	communications failed.	MIM and at least one other module	APC Technical Support. (See inside front
		has failed.	cover.)

990-7170-001 Appendix B - Troubleshooting - Page 5