American Power Conversion SYMSTRF3I user manual Output Specifications, Physical Specifications

Output Specifications

Nominal Output Voltage	220 / 230 / 240 VAC, 50/60 Hz, 1 phase, 3 wire
Output Power kVA (kW)	4-16 kVA (2.8 to 11.2 kW)
Load Power Factor	0 - 1
Output Frequency	50/60 Hz +/- 0. 1% Free Running
	50/60 Hz +/- 3 Hz Sync to Bypass; User Settable
Output Voltage Regulation	<+/- 3% for No-load to Full-load, Min AC input to Max AC, Min DC to Max DC,
Steady State	Linear or Non-linear load or any combination
Output Voltage Regulation	<+/- 5% for 100% load application or removal Linear or Non-linear load
Transient/Dynamic
Recovery Time	< 10 milliSec i.e. Half Cycle to Steady state
Total Harmonic Distortion	< 2% for Linear Loads
	< 5% for 100% non-linear loads
Load Crest Factor Supported	5:1
Overload Capacity	150% for 30 Secs, 125% for 10 mins
Efficiency	> 90% @ Full Load - Linear or Non-linear loads

Physical Specifications

Audible Noise - Fully Loaded	62dBA
Dimensions	Width: 60cm Depth: 70cm Height: 122 cm
Weight - Fully Loaded	298Kgs
Heat Dissipation - Max with	13,456 BTU's
Batteries Charging

Compliance Specifications

VDE-GS Verifications

EN 60950, EN 50091, IEC 950, VDE 0805

Page 2 - Specifications - Appendix D 990-7172-001