To connect to an OutLook multi-user switch
1Make sure the Emerge system is turned off and unplugged.
2 Place the unit in the desired location.
3Connect the video, mouse, and keyboard interconnecting cables to their respective jacks on the back panel of the EmergeCard.
4Connect the other end of the mouse, monitor, and keyboard interconnecting cables to their respective jacks in one of the console ports on the back panel of the OutLook switch.
5Connect the local mouse and keyboard to the jacks marked with their respective symbols on the back panel of the Emerge system.
6Plug in your remote access connection to the modem or network connection port.
7 Plug the power cord into its socket on the back panel of the Emerge system.
Emerge Card Remote Access User Guide | Installation • 12 |
