To connect to a user pod and system pod
1Make sure the Emerge system is turned off and unplugged.
2Place the unit in the desired location, no longer than 12 feet from a user pod.
3Connect the mouse, video, and keyboard interconnecting cables to their respective jacks on the back panel of the EmergeCard.
4Connect the other end of the mouse, video, and keyboard interconnecting cables to their respective jacks on the user pod.
5Connect the mouse, video, and keyboard cables of the system pod to their respective local KVM jacks on the back panel of the Emerge.
6Plug in your remote access connection to the modem or network connection port.
7 Plug the power cord into its socket on the back panel of the Emerge system.
Emerge Card Remote Access User Guide | Installation • 16 |
