Optimizing Mouse Performance
Apex recommends that all servers controlled by the Emerge system be adjusted as follows prior to installation.
To adjust Standard PS/2 mouse drivers
Access via Control Panel>Mouse>Motion tab>Pointer Speed
The mouse motion rate needs to be set all the way to SLOW. The EmergeCard device then can use a calculation matrix to move the mouse at the target server the appropriate distance and speed to match the remote client.
To adjust Intellimouse drivers
Access via Control Panel>Mouse>Pointer Options>Pointer Speed
The Pointer Speed needs to be set at the center (or fifth) position. Advanced – Pointer Acceleration needs to be turned off and any mouse snap features need to be deactivated.
Emerge Card Remote Access User Guide | Operation • 38 |
