Apex Digital K1106 Inserting the Cabinet Lock, Mounting the Control Board

9
Retainer Clip
(Note Position)
Retainer Slot
Locked
Unlocked
Control Board
Control Board
1. Remove the cabinet door
2. Remove the lock knockout from the control cabinet door. Insert the
key into the lock. Position the lock in the hole making certain that
the latch will make contact with the latch bracket when the door is
closed.
3. Hold the lock steady, and insert the retainer clip into the retainer slots.
Position the clip as illustrated in order to permit easy removal.
1. Hang the three (3) mounting clips (provided) on the raised cabinet (see below).
2. Insert the top of the circuit board into the slots at the top of the cabinet. Be
certain that the board rests in the correct row (see below).
3. Swing the base of the board into the mounting clips and secure the board to the
cabinet with the accompanying screws (see below).
Inserting the Cabinet Lock
Mounting the Control Board
Can
Plastic Mounting Clip