Apex Digital K1106 installation instructions A UL installation

Enable Two-way Callback: For this option to be used, at least one activation must be programmed to enable two- way voice/listen-in with the central station. After the digital communication, with this option enabled, the system will hang up and wait for the programmed time in location 0461 for a call back from the central station. The dialer LED will blink while waiting for the return call. The system will answer after the first ring and will automatically be in two-way with listen-in or will issue three beeps requesting a valid access code. If this option is not programmed, the system will hold the line after the kiss-off tone and will be in two-way listen in mode. See the "Communicator" for two-way callback options. Two-way callback is not permitted in a UL installation. To enable two-way callback refer to System Options Group 3.

Enable Two-way Voice:	This enables two-way voice to be used after the digital communication to the central
	station.
Enter Time:	The panel will prompt for a 4 digit time (use a leading 0 for times under 10:00), followed
	by a prompt for AM or PM. The next prompt is for the day of the week (1-Sunday,
	2-Monday, 3-Tuesday, 4-Wednesday, 5-Thursday, 6-Friday, 7-Saturday). Enter a two
	digit month, two digit date and two digit year.
Enter zone Description:	This location provides a method for adding up to a four word description for each zone
	in the system. The panel will prompt for a three digit zone number followed by prompts
	for 4 words. Enter the three digit value for the desired word. If programming fewer than
	4 words or to exit, press H. Zone 29 will speak "power off" when AC power loss is
	detected, "control battery trouble" when a low battery is detected and "communicator
	fail" when there is a communicator failure.
Entry Delay 1 and 2:	The system provides two different entry delay times for exterior and interior delay zone
	types. Each of these times is programmable from 1 to 255 seconds. Not to exceed 45
	seconds in a UL installation.
Event Memory Log:	The control panel has a built-in 80 event system memory log (EML) that can be retrieved
	manually with the upload/download software package or automatically by programming
	the control panel to call a computer with the upload/download software running in the
	automatic EML upload mode.
Exit Delay:	An exit delay time may be programmed for 1 to 255 seconds. Not to exceed 60 seconds
	in a UL installation.
Exit Program Mode:	Removes the system from program mode and places the system in keypad mode.
Extended Monitor	This option determines the amount of time an extended monitor activation will remain in
KeyPad Display Time:	system status.
Extended Monitor A/B:	With the system disarmed, entering a full function user code followed by the 3 or 4 digit,
	will place the system into extended monitor mode A or B. The system will speak
	"MONITOR ON" through the inside speaker. Entering a full function user code followed
	by 3 or 4 will clear any active extended monitor zones and stop the extended monitor
	beep or speech. The system will speak "MONITOR RESTORED." If the system is in
	extended monitor mode and there are no extended monitor zones active, entering a full
	function user code followed by 3 or 4 will take the system out of extended monitor
	mode. The system will speak "MONITOR OFF".
	The enunciation feature of the control panel can be used to monitor exterior, interior,
	and follower zones. As an example, it may be desirable to monitor interior door activity
	of residents in a retirement home. Normal extended monitor activity is not sent to the
	central station. If a Day Zone causes an Extended Monitor activation when the system is
	not armed, a Day Zone Trouble can be sent to the central station.

46