Apex Digital K1106 installation instructions System Times And Other Options, User Code Options

System Times And Other Options

System Time Options - A description of each time is available in the Glossary	Units	Location	Default
Entry delay 1 (Not to exceed 45 seconds in a UL installation)	seconds	....0080	020	_______
Entry delay 2 (Not to exceed 45 seconds in a UL installation)	seconds	....0081	020	_______
Exit delay (Not to exceed 60 seconds in a UL installation)	seconds	....0082	030	_______
Alarm cut off and reset (Not to be less than 4 minutes in a UL installation)	minutes	0083	005	_______
* Duration between fire, tamper, trouble chirps	seconds	....0086	005	_______
* Duration for recognition of AC power loss	minutes	0097	001	_______
Duration between spoken "Pre-alarm" cycles (000 = 3 seconds)	seconds	....0099	000	_______
Fire siren tone duration before speech	seconds	....0101	005	_______
Burglary siren tone duration before speech	seconds	....0102	005	_______
Fire cut off and reset (Not permitted in a UL installation)	minutes	0100	005	_______
Number of 4 second samples to determine loss of phone line	samples	....0456	006	_______
Time frame for User Test Timeout	minutes	0098	003	_______
Answer service callback override wait time	seconds	....0470	025	_______
Number of rings for pickup (minimum of 002, 000 disables )	rings	0458	010	_______
Inactivity time before automatic hang up while in user phone access	seconds	....0556	015	_______
Inactivity time before automatic hang up/exit when programming	seconds	....0557	060	_______
Delay before dialing after activation Phone #1 (000 - disables)	seconds	....0437	002	_______
Delay before dialing after activation Phone #2 (000 - disables)	seconds	....0438	002	_______
Off-hook time during listen-in before automatic hang-up (000 - 256 seconds) ....	seconds	....0453	120	_______
Central Station handshake wait period	seconds	....0455	025	_______
Two-way callback from central station wait period	minutes	0461	002	_______
Voice only and two-way callback wait period for a valid code	seconds	....0465	060	_______
Maximum number of dialing attempts Phone #1	attempts	....0449	008	_______
Maximum number of dialing attempts Phone #2	attempts	....0450	008	_______
Touch tone (000) or pulse (001) dialing		0454	000	_______
Ignore dial tone (for use with cellular backup) (001 - enabled)		0466	000	_______
Number of disappearing code activations	activation . 0073		001	_______
Number of retries when dialing	attempts	....0185	008	_______
Activations before Auto-Bypass (Not permitted in a UL installation: 000)	activation . 0115		000	_______
Time frame activations occur within (Not permitted in a UL installation)	hours	0116	024	_______
Time extended monitor is displayed on the keypad (000 - continuous)	seconds	....0175	030	_______
Time between speech/beeps when extended monitor is active (000 - disable) ....	seconds	....0176	005	_______
* 000 disables (Must be enabled for UL installation)

User Code Options

Options : Enter total - A description of each option is available in the Glossary										Location	Value
Duress											001
Disappearing											004
Enable master functions - bypass mode, extended monitor, user code changes										.............................	008
Works on remote telephone											016
Works on keypads											032
Works on local telephones											064
Generate open report to CS and/or Event Memory log											002
Generate close report to CS and/or Event Memory log											128
Default - User code 1 (all others default 000)										0065	250
	User Code	1	2	3	4	5	6	7	8
	Location	0065	0066	0067	0068	0069	0070	0071	0072
Program Mode Access Code Options										0549	048

30