37
Two-Way Digit Assignments
This feature is not permitted in a UL installation
Telephone Digit Default Function Location Default Value
0 Exit 2-way by going to keypad mode or hanging up ..............................0162 ................... 000
1 Microphone #1 On ................................................................................0163 ................... 001
2 Microphone #2 On ................................................................................0164 ................... 002
3 Microphone #3 On ................................................................................0165 ................... 003
4 Microphone #1 Off ................................................................................0166 ................... 004
5 Microphone #2 Off ................................................................................0167 ................... 005
6 Microphone #3 Off ................................................................................0168 ................... 006
7 High microphone sensitivity ..................................................................0169 ................... 007
8 Normal microphone sensitivity ..............................................................0170 ................... 008
9 All microphones on ...............................................................................0171 ................... 009
* Listen .....................................................................................................0172 ................... 010
# Talk........................................................................................................0173 ................... 011
Rearrange Keypad phone digits (001 to change from default) ................0161 ................... 000
Two-way key functions: It is not recommended to alter the telephone digit assignments for two-way voice, however,
to conform to some central stations this process may be necessary. To reassign the assignments, place a 001 in
location 0161. Each of the two-way functions are listed along with the digit assigned. By altering the location
values, each function can be reassigned to a new key digit. Take care when altering key assignments not to program
a single digit to have multiple functions. The system will only expedite one function per telephone digit. Two-way
voice is not permitted in a UL installation.
Two-Way Voice Options
This feature is not permitted in a UL installation
Voice Only Options - Enter total Value
One Digit Access .......................................................................................................... 001
Full User Code Access .................................................................................................. 002
The 0 digit exits to keypad mode .................................................................................. 008
Two Way Callback Options
One Digit Access .......................................................................................................... 016
Full User Code Access .................................................................................................. 032
The 0 digit exits to keypad mode .................................................................................. 128
Default .............................................................................................0464 ................... 008
Central stations that do not support two-way voice after a communicator transmission may require two-way callback.
With this option enabled (System Option Group 3) the control panel will wait a programmed period of time (0461)
after a digital communication for the central station to call. Two-way voice is not permitted in a UL installation.
The Voice only option is used for any reporting that is not a central station. Most commonly, this option is used for
two-way calls to a user's office phone or a numeric pager.
There are three security options associated with two-way callback and voice only reporting: One digit access, full
code access, and entering 0 to exit to keypad mode. If either of the access code options are selected, the panel will
answer the phone and play a repeated beep until a valid code is entered or the two-way callback time expires. If
neither code option is selected, the system will be in listen-in mode when the phone is answered. Without the
"0 exits to keypad mode" options selected, the central station will not have access to keypad mode.
When using a number pager, do not select one digit or full access code options and the panel will only make one
dialing attempt.