3Align the card over the communication slot.

The communication slot is the rightmost slot on the logic board as you face the vertical plate.

4Check the external connector on your card and see which of the following two illustrations matches the kind of card you have. Then install the card according to the illustration.

If the card has a hook on it, make sure the hook catches between the layers of the vertical plate before pushing the card into the slot.

1 If your communication card has a hook on it (as shown here), be sure that the hook engages the sheet metal on the inside

of the vertical plate.

2 Push down on the back end of the communication card until it is firmly seated in the communication slot.

Communication card

Vertical plate

External connector

Communication slot

Installing Expansion Cards

143

Page 143
Image 143
Apple 6400 appendix Align the card over the communication slot