ArcSoft 2 manual Capture Audio

Chapter 7: How Tos

7.2Capture Audio

Step 1. Launch the program and click "Capture" at the top of the screen to go to the Capture module.

Step 2. Click the Audio tab. Select to record audio from a CD or from a recording device.

If recording from a CD, select the track and then use the playback controls to jump to the spot where you would like to begin recording.

If recording from a recording device, select the device from the pull-down. Click the Format button to select the bit rate and other audio settings.

Step 3. Click the big red Record button beneath the preview window. You'll be prompted to define the specifics of the file you are about to capture:

-Choose the file name and save location.

-Optionally, check the box to add your captured file to an album. If you plan on doing any type of editing, your file will need to be in an album. See Section 3.3 for more information on albums.

Step 4. When you are finished recording, click Stop. You can listen to your captured file by clicking the Playback button.

For more information on capturing audio, see Section 2.2.

70