Avaya S8500 manual TN8412AP Sipi

Chapter 1: Introduction

You can use SSH to access the following devices:

●The S8300, S8400, S8500, and S8700-series Media Servers on Release 3.1 or later of Communication Manager

Note:

With Release 4.0 or later of Communication Manager, Telnet is disabled, so you must use SSH to access the media servers after Communication Manager software Release 4.0 or later is installed.

●A Server Availability Management Processor (SAMP), which is used with the S8500 Media Server

●A Maintenance Processor Complex (MPC), which is used with the S8400 Media Server

●A TN2312BP IPSI that is running firmware version 20 or higher

●A TN8412AP SIPI

●A TN2602 IP Media Resource 360 that is running firmware version 212 or higher

●An Expanded Meet-Me Conferencing (EMMC) server

●A SIP Enablement Services (SES) server

●G250 and G350 media gateways

●C360 Ethernet switches

! Important:

You cannot use SSH with the G700. From within the Linux command line of a media server, you can use SSH to access the G250 and the G350, but you must use Telnet to access the G700.

26 Installing and Configuring the Avaya S8500 Media Server February 2007