Avaya S8500 manual Programming the Ipsi for Dhcp addressing, Clk

Setting the VLAN and diffserv parameters

Programming the IPSI for DHCP addressing

! Important:

If an IPSI is in a port network that is backed up with the Enterprise Survivable Server (ESS) option you must use static addressing for the ESS to provide service to the port network.

For the TN2312BP IPSI circuit packs to receive IP addresses dynamically, you first must assign the switch ID and cabinet number to each IPSI circuit pack.The switch ID is a single letter, A through J. The cabinet number is a 2-digit number, 01 through 64. For G650 Media Gateways, a cabinet is defined as one or more media gateways connected by a TDM cable. This cabinet configuration is called a G650-rack-mount-stack.

Note:

In the following procedure, you must start step 2 within 5 seconds after inserting the circuit pack.

1.Fully insert the TN2312BP IPSI circuit pack. If necessary, reseat the circuit pack to start the programming sequence.

Note:

For the following step, do not use a graphite pencil.

2. Insert a pen, golf tee, or similar object into the recessed push button switch.

CLK

S

E

R

V

fpdlled3 LJK 022502

Installing and Configuring the Avaya S8500 Media Server February 2007 59