PROGRAMMING THE VSSI-PRO

The TCPIP INTERFACE sub-menu:

TCPIP FORMAT I

TCPIP DEBUGGING

EXIT

Figure 18: TCPIP INTERFACE Sub-Menu

1.Press the “Up” or “Down” button to move the cursor to “TCPIP FORMAT I” and press “Set” to enter and change the IP address to the same as ATM’s IP address.

EXAMPLE: If the ATM’s IP address is 192.168.0.141, set the address on the TCPIP 232 Adapter using this menu.

IP ADDRESS

1

192

IP ADDRESS

2

168

IP ADDRESS

3

0

IP ADDRESS

4

141

EXIT

 

 

Figure 19: TCPIP FORMAT I Sub-Menu

2.Press the “Up” or “Down” button to move the cursor to “EXIT” and press “Set” to return to the previous menu.

3.Test your transaction on the ATM to verify the VSSI-Pro and TCPIP 232 Adapter’s operation.

TCPIP 232 DEBUGGING MODE

In the TCPIP DEBUGGING mode, the data from the network will display on the monitor. However, the VSSI-Pro has a limited buffer size so if you connect to a busy network and the buffer is overrun, then data will be lost. For normal ATM data, the buffer is sufficient but care must be taken in monitoring the buffer status when doing data dumps. This is useful to verify the TCPIP 232 Adapter is connected properly and sending data to the VSSI-Pro.

TCPIP FORMAT I

TCPIP DEBUGGING

EXIT

Figure 20: TCPIP INTERFACE Sub-Menu

1.Press the “Up” or “Down” button to move the cursor to “TCPIP DEBUGGING” and press “Set” to enter and change the IP address to the same as the ATM’s IP address.

EXAMPLE: If the ATM’s IP address is 192.168.0.141, set the address on the TCPIP 232 Adapter using this menu.

IP ADDRESS

1

192

IP ADDRESS

2

168

IP ADDRESS

3

0

IP ADDRESS

4

141

EXIT

 

 

Figure 21: TCPIP DEBUGGING Sub-Menu

2.Once you select the IP address, press the “Up” or “Down” button to move the cursor to “EXIT” and press “Set” to return to the the previous menu.

TCPIP 232 ADAPTER LED INDICATOR

GREEN

POWER

TCPIP 232 Power Status

RED

REC

EIVETCPIP-232 Receive Data from ATM

GREEN

LINK

ATM Status, On = Ready / Off = Not ready

YELLOW

SPEED

Off = 10 Mbps, On = 100 Mbps Ethernet

VSSI-Pro VIDEO SERIAL ATM INTERFACE

18

Page 18
Image 18
AVE VSSI-PRO operation manual Tcpip Format Tcpip Debugging Exit, Tcpip 232 Debugging Mode