AVE VSSI-PRO Protocol Async, Data Encode NRZ Ascii Capture Data to, CHA RX Byte, CHB RX Byte

PROGRAMMING THE VSSI-PRO

CAPTURE TO MEMORY

Press the “Up” or “Down” button to move the cursor to “CAPTURE TO MEMORY” and press “Set”. The following display will appear (example only):

PROTOCOL :				ASYNC
RX BAUDRATE	:		19200
TX BAUDRATE :			19200
DATA ENCODE :					NRZ
		ASCII
CAPTURE DATA TO		MEMORY
CHA RX BYTE :				00000
CHB RX BYTE :				00000

Figure 55: CAPTURE TO MEMORY Display

Press “Set” to return to the previous menu.

DUMP TCP/IP

Press the “Up” or “Down” button to move the cursor to “DUMP TCP/IP” and press “Set”. The following sub-menu will appear:

IP ADDRESS 1	0
IP ADDRESS 2	0
IP ADDRESS 3	0
IP ADDRESS 4	0
EXIT

Figure 56: DUMP TCP/IP Sub-Menu

An asterick shows which of IP Addresses 1-4 is selected. Press the “Up” or “Down” button to move the cursor to the desired IP Address 1-4 and press “Set”. The cursor will start flashing. Press the “Up” or “Down” button to set the value. The choices are 0 through 255. When the desired value is displayed press “Set”. Press the “Up” or “Down” button to move the cursor to “EXIT” and press “Set”. You will be presened with the following display (example only):

PROTOCOL :		ASYNC
RX BAUDRATE	:	19200
PARITY :			NONE
DATA BIT :			8
BUFFER REMAINING :			03071
RECEIVIED BYPE :			0000

Figure 57: DUMP TCP/IP Display

Press “Set” to return to the previous menu.

ATM DEMO

This demonstrates the VSSI Pro's use as an Automatic Teller Machine Interface. To access this demonstration, press the “Up” or “Down” button to move the cursor to “ATM DEMO” and press “Set”. The demo will start after a few seconds. To exit this demo, press “RESET”. This will take you out of the programming menu entirely though, and you will have to

re-enter the main-menu to continue programming.

VSSI-Pro VIDEO SERIAL ATM INTERFACE

44