PROGRAMMING THE VSSI-PRO
A FEW WORDS ABOUT PROGRAMMING
The VSSI-Pro is programmed by pressing and releasing specific combinations of the four front panel push-buttons. Via these four simple buttons, all of the powerful programming features of the VSSI-Pro are available to you. A video source and a monitor must be connected in order for you to see the programming menus. The following sections provide detailed programming instructions.
Figure 3: VSSI-Pro Four Push-Button Access to all the Programming
USER FRONT PANEL CONTROLS
Front panel push-button controls are provided to allow simple changing of the display’s vertical and horizontal position and the gray scale or border. This eliminates the need of the user to enter the main-menu, and eliminates the risk of inadvertently changing important programming settings.
Changing the Gray Scale
Down Up Set Reset
Figure 4: Four Front Pannel Push-Buttons of VSSI-Pro (Down)
1.Press and hold the “Down” button.
2.Press and release the “Reset” button.
3.Release the “Down” button.
4.Press “Down” or “Up” to select the gray scale.
5.When the choice is made, press and release the “Set” button.
VSSI-Pro VIDEO SERIAL ATM INTERFACE
