AVE VSSI-PRO operation manual DOWNLOAD/UPLOAD Setup Using a PC, Up/Down, UP and Down, UP and SET

PROGRAMMING THE VSSI-PRO

The count will end at 100. When this prompt clears the screen, the data transfer is complete. Press “Reset” to exit this menu on both VSSI-Pro’s.

Now go to the main-menu of the previously UNPROGRAMMED VSSI-Pro on the right side of the screen. Enter the EXCEPTIONS menu. You should see your exceptions and other programmed data just as they were on the original PROGRAMMED VSSI-Pro.

DOWNLOAD/UPLOAD SETUP USING A PC

You can use a Laptop PC and AVE’s IC or equivalent communications program to store data from a VSSI-Pro to a file. This file can then be uploaded to other VSSI-Pro units with the same software revision level. Use 4800 baud for the PC’s baud rate.

	DB-9	DB-25
VSSI-Pro	(Serial Port)	(Parallel Port)
2	3	2
3	2	3
5	5	7

Table 4: Triport Pin-Out

NOTE "

For locations or companies with a large number of interfaces, we strongly advise that you keep one programmed VSSI-Pro as a master and a backup to insure your system integrity. This will also aid in reprogramming any changes and protect against any catastrophic events.

HELP

A helpful reference of key terms used in programming your VSSI-Pro.

Key Definitions :
UP/DOWN	_ _ Change value
SET	_ _ Enter change mode
	save change
	Go to Position
UP AND DOWN	_ _ Save string input
UP AND SET	_ _ Erase character

Figure 65: HELP Sub-Menu

48