Axis Communications CD E100 user manual 118

Appendix A: Parameter List

Parameter name	Value	Description
BusMode	= Asynchronous	Specifies the transfer mode on the SCSI bus: Asynchronous,
		Synchronous, Fast-10 or Ultra.
[IDE]
JukeBoxLockTime	= 0	Specifies the maximum duration for a data read operation during
		multiple access requests to prevent disc changer fluttering. Default
		is 0 seconds which disables the function.
[IP]
InternetAddress	= 192.36.253.80	The StorPoint CD IP address.
DefaultRouter	= 0.0.0.0	The IP address for the default router. All traffic directed outside
		the local network (according to the NetMask) is sent to the default
		router. Any re-routing via other routers is done automatically. The
		default 0.0.0.0 indicates that no default router is set.
NetMask	= 0.0.0.0	Used to determine when the traffic should be sent via a router. For
		example, the normal class C mask is 255.255.255.0. The default
		0.0.0.0 indicates that automatic router sensing is used.
BOOTPEnable	= yes	Enables BOOTP IP address setup.
DHCPEnable	= yes	Enables DHCP IP address setup.
RARPEnable	= yes	Enables RARP IP address setup.
DomainName	=	Name of the domain to which the StorPoint CD belongs.
PrimaryDNS	= 0.0.0.0	The IP address of the primary DNS server. Used for identifying
		computers with names instead of IP addresses.
SecondaryDNS	= 0.0.0.0	The IP address of the secondary DNS server, should the primary
		DNS server be unavailable or disconnected.
NTPServer	=	Name or IP address for the NTP server.
EnableWINS	= no	Enables WINS over NetBIOS/TCP/IP.
PrimaryWINSserver	= 0.0.0.0	The IP address of the primary WINS server.
SecondaryWINSserver	= 0.0.0.0	The IP address of the secondary WINS server, if required.
ProtectIP	= no	Protects the StorPoint CD from changing the IP address using the
		ARP or Web browser method. Default is no, which allows the IP
		address to be set within 30 minutes from restart.
SLPDirectoryAgent1	= auto	The IP address or DNS name of an SLP directory agent.
SLPDirectoryAgent2	= auto	The IP address or DNS name of an SLP directory agent.
SLPScopeList	= DEFAULT	The SLP scope to which the StorPoint CD belongs. SLP scopes are
		used for collecting services into logical or administrative groups.
		Specify the scope names in a list separated by commas, i.e.
		scope1,scoper2,scope3... The default value DEFAULT means that no
		specific scope will be configured.
[HTTP]
HTTPEnable	= yes	Enables HTTP. Set to no to restrict users from accessing the
		CD-ROMs from a Web browser.
EnableMediaAccess	= yes	Enables access to the inserted discs. When set to no, only
		administration is available from HTTP.
ExternalLink	=	Specifies the URL to a customized link, e.g. to your company’s Web
		site. The link will be available from the StorPoint CD Web
		interface.
ExternalImage	=	Specifies the URL to the image that will indicate the customized
		external link.
[FTP]
FTP User name	=	Alternative user name for accessing the StorPoint CD Volumes
		folder via FTP.
FTP User password	=	Once written into the configuration file, the password will not be
		shown but replaced with *’s, representing each letter of the
		password.
Timeout in seconds	= 0	The time of inactivity in seconds after which an FTP is closed down.
FTP Max Users	= 10	The maximum number of simultaneous FTP sessions.
[SMB]
SMBEnable	= yes	Enables SMB.
ServerName	=	The server name in the SMB environment. Default is AXIS<nnnnnn>
		where nnnnnn are the last six digits of the serial number.

118 AXIS StorPoint CD E100 User’s Manual