Axis Communications user manual Axis StorPoint CD E100 User’s Manual 119

		Appendix A: Parameter List
Parameter name	Value	Description
ServerPassword	= pass	The Supervisor, Administrator or Root user password used for
		basically all protocols; i.e. HTTP, NetWare bindery, SMB user-level,
		SNMP and FTP. Once written into the configuration file, the
		password will not be shown but replaced with eight *’s,
		representing the password.
Domain/GroupName	=	Name of theStorPoint CD workgroup in SMB. If not specified, the
		StorPoint CD will appear in the workgroup that comes first in
		alphabetical order.
SecurityMode	= shareLevel	Specifies the security mode used in SMB: userLevel or shareLevel.
NTDomainInstallation	= no	Set to yes when you want to install the StorPoint CD in an NT
		domain.
EnableNBT	= yes	Enables SMB over NetBIOS/TCP/IP.
NBTscopeID	=	Defines the NetBIOS scope to which the StorPoint CD belongs.
EnableNetBEUI	= yes	Enables SMB over NetBIOS/NetBEUI.
NetBEUIFrameType	= auto	If set to auto, 802.2 or DIX will automatically be selected by
		scanning the network. If required, the frame type can also be set to
		either 802_2 or dix.
[NFS]
NFSEnable	= yes	Enables NFS.
DefaultUid	= -2	Default user id to be used when authenticating PCNFSD clients.
		Disable by setting the parameter to 0 (zero).
PCNFSDAuthentServer	= 0.0.0.0	The IP address of the PCNFSD authentication server used for
		authenitcating PCNFSD clients. The default 0.0.0.0 disables the
		function.
ExportVolumes	= yes	Enables export of each new disc inserted as a mount point. If you
		restore the factory default settings, all the currently inserted discs
		will be exported.
LowerNonCase	= yes	Set to yes to displays non-case sensitive file systems in lower case.
[SNMP]
GetCommunityName	= public	Specifies the community that has read only access to all supported
		SNMP objects except writeCommunity, SupervisorPassword and
		ftpPassword. It corresponds to the readCommunity SNMP object.
TrapDestination	= 0.0.0.0	Specifies the IP address which SNMP traps are sent to. It
		corresponds to the trapAddress SNMP object. Default is 0.0.0.0,
		i.e. all SNMP traps are disabled.
TrapCommunityName	= public	Specifies the community for all generated SNMP traps. It
		corresponds to the trapCommunity SNMP object.
SystemContact	=	Optional entry which should be in plain text and may be used to
		show the name of the system contact person.
SystemName	=	Optional entry which should be in plain text and may be used to
		show the name of the location of the system.
SystemLocation	=	Optional entry which should be in plain text and may be used to
		show the name of the location of the system.
AuthenticationTrap	= disabled	Disables the SNMP authentication failure traps. It corresponds to
		the snmpenableAuthenTraps (MIB-II) SNMP object.
[NetWare]
NWEnable	= yes	Enables NetWare support.
IPXEnable	= yes	Enables the IPX protocol.
Frame_802_2	= auto	Enables the 802.2 frame type.
Frame_802_3	= auto	Enables the 802.3 frame type (Ethernet versions only).
Frame_EthernetII	= auto	Enables the Ethernet II frame type (Ethernet versions only).
Frame_SNAP	= auto	Enables the SNAP frame type.
NetWareIP_Enable	= no	Enables NCP over IPX/UDP (NetWare/IP).
NetWareIP_DSS_Server	=	The IP address of the DSS server.
PureIPEnable	= yes	Enables NCP over TCP/IP (PureIP).
ServerName	= AXIS<nnnnnn>_NW	NetWare server name to be presented to the NetWare clients.
		Default is AXIS<nnnnnn>_NW where nnnnnn are the last six digits
		of the serial number.
InternalNetAddress	= nn-nn-nn-nn	Internal network address. Default is nn-nn-nn-nnwhere nnnnnnnn
		are the last eight digits of the serial number.
BurstMode	= on	Enables burst mode.
ShowAllVolumes	= yes	Shows all drives and discs also at SYS level.

AXIS StorPoint CD E100 User’s Manual 119