Section 4: NetWare (NCP)
3.Click admin. You will be prompted for the Server password. By default, this is set to pass. To change the Server password, see “Server Password” on page 24.
4.Click Network Settings.
5.Click Wizard 
. The Network Settings Wizard dialog appears.
6.Choose NetWare (NCP) to set up the StorPoint CD for your NetWare clients. Click Start to proceed with the installation.
7.Follow the instructions on the screen. When finished, click Close.
8.Click Detailed View 
. The Protocols dialog box appears.
9.Select the NetWare (NCP) tab and verify the settings.
10.Click OK.
11.Restart your StorPoint CD.
Notes: ❏ Online help | is available for all parameters. |
❏The parameter list is described in detail in “Appendix A - Parameter List ” .
Text Editor If you do not have TCP/IP on your network, follow these steps to install the StorPoint CD as an NDS server:
1.Login as Supervisor in bindery mode.
2.Verify that the NDS tree is synchronized. To do that, you load DSREPAIR.NLM on a NetWare server console in the NDS tree and select Unattended full
repair.
Important! ❏ If the NDS tree is not synchronized, do not continue the installation until you have solved the problem.
46 | AXIS StorPoint CD E100 User’s Manual |
