6.Once the file is selected, click on the “Press to Upload the File” button.
IMPORTANT: The full upgrade process can take up to three minutes to complete. Once the upload stage has begun, DO NOT reset or power off the unit until it produces a series of three short beeps to indicate upgrade completion.
7.After the series of three short beeps are heard, you can close your web browser and power cycle the RCP120.
8.After the unit has rebooted, press and hold buttons 11 and 12 for a couple of seconds to see that the new firmware version is running per the text displayed in button 12.
9.This completes the steps necessary to upgrade the RCP120.
44 | Remote Control Panel User’s Guide ● Rev 00 |
