Internal IP Address: Enter the LAN server/host IP address that the service request from the Internet will be sent to.
Candidates: You can also select the Candidates which are referred from the ARP table for automatic input.
NOTE: You need to give your LAN server/host a static IP address for the Virtual Server to work properly.
Click Apply to save your changes.
Using port forwarding does have security implications, as outside users will be able to connect to PCs on your network. For this reason, using specific Virtual Server entries just for the ports your application requires, instead of using DMZ is recommended.
4.4.8Advanced
Configuration options within the Advanced section are for users who wish to take advantage of the more advanced features of BiGuard 2/10. Users who do not understand the features should not attempt to reconfigure their router, unless advised to do so by support staff.
There are five items within the Advanced section: Static Route, Dynamic DNS ,Device Management, IGMP and VLAN Bridge.
There are three items within the Advanced section: Static Route, Dynamic DNS and Device Management.
4.4.8.1Static Route
The static route settings enable the router to route IP packets to another network
109
