Chapter 5: Troubleshooting
5.1Basic Functionality
This section deals with issues regarding your BiGuard 2/10’s basic functions.
5.1.1Router Won’t Turn On
If the Power and other LEDs fail to light when your BiGuard 2/10 is turned on:
-Make sure that the power cord is properly connected to your firewall and that the power supply adapter is properly connected to a functioning power outlet.
-Check that you are using the 12VDC power adapter supplied by Billion for this product.
If the error persists, you may have a hardware problem, and should contact technical support.
5.1.2LEDs Never Turn Off
When your BiGuard 2/10 is turned on, the LEDs turn on for about 10 seconds and then turn off. If all the LEDs stay on, there may be a hardware problem.
If all LEDs are still on one minute after powering up:
-Cycle the power to see if the router recovers.
-Clear the configuration to factory defaults.
If the error persists, you may have a hardware problem, and should contact technical support.
5.1.3LAN or Internet Port Not On
If either the LAN LEDs or Internet LED does not light when the Ethernet connection is made, check the following:
117
